| Attention: An electrical locking mechanism is |
| used in this drive so that an erroneous operation |
| does not open the to disc tray during write. Make |
| sure that the power is on and the drive is not in |
| operation before pressing the Eject button to open |
| the disc tray. |
| If the disc tray cannot be opened when you press |
| the Eject button, or if the disc tray needs to be |
| opened when the power is not supplied from the |
| USB power cable, use the emergency eject hole 4 |
| in the front panel of the drive. |
| Check that nothing is placed in front of the disc |
| tray when ejecting. |
4 Emergency eject | The emergency eject is used for ejecting the |
| medium in an emergency when the drive is |
| powered off. Insert a paper clip into the |
| emergency eject hole to open the disc tray. |
5 DC IN connector | Used to connect the USB power cable. |
6 USB connector | Used to connect the USB data cable. |
Hardware and software requirements
To use the drive, your computer must meet the following requirements:
•Two USB 2.0 connectors available
•Microsoft® Windows® XP or Microsoft Windows Vista® operating system
Chapter 1. About the Lenovo USB Portable DVD Burner 3
