Table 2. Startup menu items

Menu item

Value

Comments

 

 

 

 

Boot

 

 

See “Changing the startup sequence” on

 

 

 

page 42.

 

 

 

 

Option Key Display

Disabled

If you select Disabled, then the message

 

Enabled

“To interrupt normal startup, press

 

Enter.” is not displayed during the POST.

 

 

 

 

 

 

 

Boot Device List F12 Option

Disabled

If you select Enabled, the F12 key

 

Enabled

is recognized and the Boot Menu is

 

displayed.

 

 

 

 

 

 

 

Boot Order Lock

Disabled

If you select Enabled, the boot priority

 

Enabled

order is locked for your future use.

 

 

 

 

 

 

Restart menu

If you need to close the ThinkPad Setup and restart the system, select Restart from the ThinkPad Setup menu. The following submenu is displayed:

Exit Saving Changes: Restart the system after saving the changes.

Exit Discarding Changes: Restart the system without saving the changes.

Load Setup Defaults: Load the default setting that was in effect at the time of purchase.

Discard Changes: Discard the changes.

Save Changes: Save the changes.

Updating your system UEFI BIOS

The Unified Extensible Firmware Interface (UEFI) BIOS is a part of the system programs that make up the basic layer of software built into your tablet. The UEFI BIOS translates the instructions from other software layers.

Your tablet system board has a module called EEPROM, also referred to as flash memory. You can update the UEFI BIOS and the ThinkPad Setup program by starting your tablet with a flash update optical disc or flash update application running in the Windows environment.

In some instances when you add software, hardware, or a device driver, you might be informed that you need to update your UEFI BIOS in order for the new addition to work properly.

To update your UEFI BIOS, go to the following Web site and follow the instructions on the screen: http://www.lenovo.com/ThinkPadDrivers

Using system management

This section is intended primarily for network administrators.

Your tablet is designed for manageability, so that you can redirect more of your resources to better meet your business objectives.

This manageability, or “Total Cost of Ownership” (TCO), enables you to remotely operate client tablets in the same way as you operate your own tablet, such as turning on a client tablet, formatting hard disk drive, and installing software.

Chapter 9. Advanced configuration 43

Page 51
Image 51
Lenovo N3S2PUK manual Restart menu, Updating your system Uefi Bios, Using system management