Lenovo R50e Series, R51e Series manual 66 R50e, R51e and R52 Series

Symptom-to-FRU index

Symptom or error	FRU or action, in sequence
2000	1. Undock docking station or
Hard Drive Active Protection	port replicator if it is
sensor diagnostics failed.	attached to the ThinkPad
Press <Esc> to continue.
	computer, and place the
Press <F1> to enter SETUP
	computer on a horizontal
	surface. Do not apply any
	physical shock to the
	computer.
	2. Run Diagnostics -->
	ThinkPad Devices -->HDD
	Active Protection Test.
2010	Inform the following information
Warning: Your internal hard disk	to the customer:
drive (HDD) may not function	If in the primary bay the
correctly on this system. Ensure	customer is using a non-IBM or
that your HDD is supported on	non-Lenovo hard disk drive
this system and that the latest	(HDD), or an old generation
HDD firmware is installed.	IBM HDD which is not
	supported by this system, with
	the risk in mind, the customer
	can still use it by pressing ESC.
	If in the primary drive bay the
	customer is using a supported
	IBM/Lenovo HDD with an old
	firmware, the customer needs
	to update its firmware to the
	latest. The latest version is
	available at
	http://www.lenovo.com/think/
	support

66R50e, R51e and R52 Series