|
| ||
|
| ||
Symptom or error | FRU or action, in sequence | ||
|
|
| |
1802 | 1. | Remove Mini PCI network | |
Unauthorized network card is |
| card. | |
plugged | 2. | System board. | |
remove the miniPCI network | |||
|
| ||
card. |
|
| |
|
|
| |
1803 | 1. | Remove the daughter | |
Unauthorized daughter card is |
| card that you installed. | |
plugged | 2. | System board. | |
remove the daughter card. | |||
|
| ||
|
|
| |
1810 | 1. | If the Access IBM | |
Hard disk partition layout error. |
| Predesktop Area has been | |
|
| previously disabled, then | |
|
| go to the BIOS Setup | |
|
| Utility by pressing F1 to | |
|
| open the BIOS Setup | |
|
| Utility. Select Security | |
|
| Predesktop Area | |
|
| Access IBM Predesktop | |
|
| Area. Set this item to | |
|
| Disabled. Save and exit. | |
| 2. If the Access IBM | ||
|
| Predesktop Area has not | |
|
| been previously disabled, | |
|
| press Enter to load Access | |
|
| IBM Predesktop Area. Then | |
|
| run RECOVER TO | |
|
| FACTORY CONTENTS in | |
|
| Access IBM Predesktop | |
|
| Area. | |
| 3. If item 2 failed, press F3 in | ||
|
| the Welcome screen in | |
|
| RECOVER TO FACTORY | |
|
| CONTENTS. Run FDISK, | |
|
| and then delete all | |
|
| partitions. Run RECOVER | |
|
| TO FACTORY CONTENTS | |
|
| in Access IBM Predesktop | |
|
| Area again. | |
| 4. If item 3 failed, select | ||
|
| ||
|
| Access IBM Predesktop | |
|
| Area. Boot from the | |
|
| Recovery CD and perform | |
|
| full recovery from it. | |
| 5. If item 4 failed, replace the | ||
|
| hard disk drive. | |
|
|
|