Lenovo S10 Using Your Computer To set a User Password, Changing or Removing the User Password

S9-S10 User Guide V1.0_en.book Page 23 Wednesday, July 23, 2008 5:53 PM

Chapter 2. Using Your Computer

To set a User Password:

1Turn on your computer. Press F2, while the initial screen is displayed. The BIOS Setup Utility screen opens.

2Select Security, using the cursor directional keys.

3Select Set User Password, and press the Enter key. The Set User Password window opens.

4Choose your user password, which can be from one to eight alphanumeric characters in any combination. Type it in the Enter New Password field.

5Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it.

6Commit your password to memory, and press the Enter key.

7Press F10 to exit.

8Select OK in the Setup Confirmation window.

￿Note:

You can set the User Password only when the Supervisor Password has been set.

Changing or Removing the User Password

To change the password, do the following:

1Select Set User Password, and press the Enter key. The Set User Password window opens.

23