Lenovo S10 manual Using Your Computer, Changing or Removing the Supervisor Password

S9-S10 User Guide V1.0_en.book Page 22 Wednesday, July 23, 2008 5:53 PM

Chapter 2. Using Your Computer

Changing or Removing the Supervisor Password

To change the password, do the following:

1Select Set Supervisor Password, and press the Enter key. The Set Supervisor Password window opens.

2Select Enter Current Password and type in the correct password. Then press Enter key once to move to Enter New Password field, type a new supervisor password in.

3Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it.

4Commit your password to memory, and press the Enter key.

To remove password, do the following:

1Select Set Supervisor Password, and press the Enter key.

2Select Enter Current Password and type in the correct password, and press the Enter key thrice.

￿Note:

Make sure the Password on boot is set to Enabled if you need the password protection at power on.

22