Lenovo TD230 manual Viewing Event Log, Configuring settings, Configuring network settings

Option	Task Description
Sensor selection pull-down box	Select the type of sensor readings to display in the list.
	The default is to see all sensors.
Sensor Readings list	Selected sensors shown with their name, status, and
	readings.
Show Thresholds button	Click it to expand the list, showing low and high threshold
	assignments. See the critical (CT) and non-critical (NC)
	thresholds for the selected sensors. Use scroll bar at the
	bottom to move display left and right.
Hide Thresholds button	Click it to return to original display, hiding the threshold
	values.
Refresh	Click it to refresh the selected sensor readings.

Viewing Event Log

The Event Log page displays the event logs.

The following table lists the options available in this page:

Option	Task Description
Event Log category drop-down list	Select the type of events to display in the list.
Event Log list	Selected sensors are shown with their name, status, and
	readings. This includes a list of the events with their ID,
	time stamp, sensor name, sensor type, and description.
Clear Event Log button	Click it to clear the event logs.

Configuring settings

The Configure Settings page is used to configure settings. By default, it opens in the Network Settings window.

Warning: The Remote Management Module IP address must be on a different subnet than the baseboard IP address used for management traffic.

Configuring network settings

The Network Settings page is used to configure the network settings. It provides options to do either of the following:

•Automatic: Obtain the IP address automatically (use DHCP).

•Manual: Manually configure one.

The following table lists the options available in this page:

16ThinkServer TD230 Remote Management User Guide