Lenovo V200, V100 manual Status indicators, Indicator Meaning, Green, Blinking green

Product overview

Status indicators

The system status indicators show the status of the computer, as follows:

Indicator	Meaning
Caps lock	Caps Lock mode is enabled. You can enter all alphabetic
	characters (A-Z) in uppercase without pressing the Shift key. To
	enable or disable Caps Lock mode, press the CapsLk key.
Num lock	The numeric keypad on the keyboard is enabled. To enable or
	disable the keypad, press and hold the Fn key, and press the
	NmLk key.
5-1 Digital	A card in the 5-1 Digital Media Reader is being used to read and
Media Reader	write data. When this indicator is blinking, do not put the
status	computer into sleep (standby) mode, remove the card from the
	slot, or turn off the computer.
Device Access	A hard disk drive or an optical drive is being used to read or
	write data. When this indicator is blinking, do not put the
	computer into sleep (standby) mode, remove the device from the
	bay, or turn off the computer.
	Note: Do not move the system while this indicator is on. Sudden
	physical shock could cause drive errors.
Power on	The computer is on and ready to use. This indicator stays lit
	whenever the computer is on and is not lit when the computer is
	in sleep (standby) mode.
Sleep (standby)	Green:
status		The computer is in sleep (standby) mode.
	Blinking green:
		The computer is entering sleep (standby) mode or hibernation
		mode, or is resuming normal operation.

Lenovo 3000 V100 and V200 33