Error messages
Symptom or error | FRU or action, in sequence | |
|
| |
Unsupported memory. | DIMM. Make sure to use supported | |
| memory. | |
|
|
|
Device address conflict. | 1. | Load “Setup Defaults” in the BIOS |
|
| Setup Utility. |
| 2. | Backup battery. |
| 3. | System board. |
|
|
|
Allocation error for device. | 1. | Load “Setup Defaults” in the BIOS |
|
| Setup Utility. |
| 2. | Backup battery. |
| 3. | System board. |
|
|
|
Failing bits: nnnn. | 1. | DIMM. |
| 2. | System board. |
|
|
|
Invalid system configuration data. | 1. | DIMM. |
| 2. | System board. |
|
|
|
I/O device IRQ conflict. | 1. | Load “Setup Defaults” in the BIOS |
|
| Setup Utility. |
| 2. | Backup battery. |
| 3. | System board. |
|
|
|
Hibernation error. | 1. | Restore the system configuration to |
|
| what it was before the computer |
|
| entered hibernation mode. |
| 2. | If memory size has been changed, |
|
| |
|
|
|
Fan error. | 1. | Fan. |
| 2. | Thermal grease. |
| 3. | System board. |
|
| |
Thermal sensing error. | System board. | |
|
| |
Authentication of system services failed. | The Predesktop Area in the HDD is | |
Press <Esc> to resume. | corrupted. Restore it from a recovery disc. | |
|
| |
Cannot boot from any device. | Check the status of device which you want | |
| to boot from. | |
| Device not found. | |
| 1. | The device you want to boot from. |
| 2. | System board. |
| Device Error. | |
| 1. | The device you want to boot from. |
| 2. | System board. |
| No valid operating system. | |
| 1. | Check that the operating system has no |
|
| failure and is installed correctly. |
| 2. | Reinstall the operation system. |
| Excluded from boot order. | |
| v Enter the BIOS Setup Utility and add the | |
|
| device in boot order. |
|
|
|
38MT 0763 and 0764
