Table26. Removal steps of CPU thermal device/fan (continued)
5
6
Table27. Installation of the CPU thermal device/fan
When installing:
vBefore you attach the fan assembly to the computer,apply thermal grease, at an
amount of 0.2 grams, on the part marked b as in the following figure. Either
too much or too less application of grease can cause a thermal problem due to
imperfect contact with a component. For the new CPU thermal device/fan, you
need to peel the thin film off from the rubber marked a.
ab
vMake sure that the fan connector is attached firmly.
ThinkPad W700 and W700ds 95