Table13. Removal steps of HDD cover, HDD and HDD rubber rails or SSD and storage
converter (continued)
2
Note: Mounted number of the hard disk drive depends on the models. In
models with RAID features, two hard disk drives that have same FRU no. must
be used in slot 0 (a) and in slot 1 (b).
3
4
b
a
When installing: Make sure that the HDD connector or SSD connector is
attached firmly.
HDD and HDD rubber rails:
5
5
When installing: The rubber rails on the hard disk drive must be attached to
the replacement drive. Otherwise the drive cannot be installed properly.
70 ThinkPad W700 and W700ds HardwareMaintenance Manual