Table9. Fn key combinations (continued)
Key combination Description
Fn+F7 Apply a presentation scheme directly,with no need to start
Presentation Director.
Todisable this function and use the Fn+F7 key combination for
switching a display output location, start Presentation Director,and
change the settings.
Click Start -> All Programs -> ThinkVantage-> Presentation Director
Switch a display output location. If an external monitor is attached,
computer output is displayed in the following three patterns by turns:
vExternal monitor (CRT display)
vComputer display and external monitor (LCD + CRT display)
vComputer display (LCD)
Notes:
vThis function is not supported if different desktop images are
displayed on the computer display and the external monitor (the
Extend desktop function).
vThis function does not work while a DVD movie or a video clip is
playing.
Toenable this function, start Presentation Director, and change the
Fn+F7 settings.
Note: Multiple users can log on to a single operating system by using
different user IDs. Each user needs to change the settings.
Click Start -> All Programs -> ThinkVantage-> Presentation Director,
and change the Fn+F7 Settings.
Fn+F8 Change the settings of the UltraNav pointing device.
Fn+F9 Open the EasyEject Utility screen. Buttons for the following choices are
displayed:
vEject ThinkPad PC from Mini Dock: This button is displayed only if
the ThinkPad computer has been attached to a ThinkPad W700 Mini
Dock. If you click this button, the computer is detached from the
ThinkPad W700 Mini Dock
vRun EasyEject Actions: This button is used to select, stop, or remove
external devices connected to the ThinkPad computer.
vConfigure EasyEject Actions: This button is used to open the
EasyEject Utility main window.
vFn+F9 Settings: Configures the settings for the Fn+F9 function.
Fn+F10 Reserved.
Fn+F11 Reserved.
Fn+F12 Put the computer into hibernation mode. Toreturn to normal operation,
press the power button for less than four seconds.
Notes:
vThough the screen fades out immediately after Fn+F12 are pressed,
the computer does not enter the hibernation mode immediately.Do
not move the system until the sleep (standby) status indicator stops
blinking. Moving the computer when it is entering hibernation may
cause corruption of the hard disk drive.
vTouse this combination of the keys, you must have the ThinkPad
PM device driver installed on the computer.
58 ThinkPad W700 and W700ds HardwareMaintenance Manual