Table8. FRU tests (continued)
FRU Applicable test
Memory 1. If two DIMMs are installed, remove one of them and run
Diagnostics --> Memory Test—Quick.
2. If the problem does not recur,return the DIMM to its place,
remove the other one, and run the test again.
3. If the test does not detect the error,run Diagnostics -->
Memory Test—Full.
Fan 1. Turnon the computer and check the air turbulence at the
louver near the PC Card slot.
2. Run Diagnostics --> ThinkPad Devices --> Fan.
TrackPointor pointing
device
If the TrackPointdoes not work, check the configuration as
specified in the BIOS Setup Utility.If the TrackPoint is disabled,
select Automatic to enable it.
After you use the TrackPoint,the pointer may drift on the screen
for a short time. This drift can occur when a slight, steady
pressure is applied to the TrackPointpointer. This symptom is not
a hardware problem. If the pointer stops after a short time, no
service action is necessary.
If enabling the TrackPointdoes not correct the problem, continue
with the following:
vInteractive Tests--> Mouse
TouchPad If the TouchPad does not work, check the configuration as
specified in the BIOS Setup Utility.If the Touch Pad is disabled,
select Automatic to enable it. If enabling the TouchPad does not
correct the problem, continue with the following:
vInteractive Tests--> Mouse
56 ThinkPad W700 and W700ds HardwareMaintenance Manual