IdeaPad Z360 Hardware Maintenance Manual
1080 DIMM
For access, remove these FRUs in order:
•• “1010 Battery pack” on page 34
•• “1070 DIMM/thermal slot coverr” on page 41
Figure 8. Removal steps of DIMM
Release the two latches on both edges of the socket at the same time in the
direction shown by arrows 1, and then unplug the DIMM in the direction shown by arrow 2.
1 | 1 |
2
Note: If only one DIMM is used on the computer you are servicing, the card
must be installed in
b
a
When installing: Insert the notched end of the DIMM into the socket. Push the DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly fixed in the slot and difficult to be moved.
42
