Lenovo Z60M, Z60T manual Computer screen problems, Click Advanced

Solving computer problems

Computer screen problems

Problem:

The screen is blank.

Solution:

vPress Fn+F7 to bring up the image.

Note: If you use the Fn+F7 key combination to apply a presentation scheme, press Fn+F7 at least three times in three seconds, and the image is displayed on the computer screen.

vIf you are using the AC adapter, or using the battery, and the battery status indicator is on (is green), press Fn+Home to make the screen brighter.

vIf the standby status indicator is on (is green), press Fn to resume from the standby mode.

vIf the problem persists, do the Solution in the problem below.

Problem:

The screen is unreadable or distorted.

Solution:

Make sure that:

vThe display device driver is installed correctly.

vThe screen resolution and color quality are correctly set.

vThe monitor type is correct.

To check these settings, do as follows:

Open the Display Properties window.

1.Click the Settings tab.

2.Check whether the screen resolution and color quality are correctly set.

3.Click Advanced.

4.Click the Adapter tab.

5.Make sure ″ATI xxxxx″ or ″Intel 915GM″ is shown in the adapter information window.

Note: The device driver name xxxxx depends on the video chip that has been installed on your computer.

6.Click the Properties button. Check the ″Device status″ box and make sure the device is working properly. If not, click the Troubleshooter button.

7.Click the Monitor tab.

8.Make sure the information is correct.

9.Click the Properties button. Check the ″Device status″ box and make sure the device is working properly. If not, click the Troubleshooter button.

26ThinkPad® Z60t and Z60m Series Service and Troubleshooting Guide