![](/images/new-backgrounds/1110176/11017627x1.webp)
Client Setup
Checking your Network Protocols (Windows 9x)
Your PC must have EITHER the TCP/IP or NetBEUI protocols installed. (All versions of Windows after Windows 95 have TCP/IP installed by default.)
•If using the
•If using other methods, you must check manually, as follows:
1.Select the Settings - Control Panel - Network option on the Start Menu. You should see a screen like the one following:
Figure 5: Network Configuration
•The top line in the list (NetBEUI
•The highlighted line (TCP/IP
2.If neither line is present:
•Install the NetBEUI protocol by selecting Add - Protocol - Microsoft - NetBEUI - OK. You may be prompted for your Windows
•If required, you can also install TCP/IP. However, depending on your LAN environment, TCP/IP may require further configuration.
3.If either protocol is already installed, proceed with installation.
- 11 -