LevelOne FPS-3002USB, FPS-2112 manual If you have a single File Server, Printer, Operator, User

NetWare

•The right column lists any available servers. Note that to be available, you must be logged into the Server with Supervisor rights.

•Use the “<<” and “>>” buttons to move file servers to and from the Serviced Fileserver list on the left.

•When completed, click Next. This will create a NetWare Print Server object on the Serviced Fileserver if it does not yet exist. The NetWare Print Server will have the same name as the NetWare Print Server on the Master File Server.

•After clicking Next, you will see the screen below.

If you have a single File Server:

Clicking the NetWare Configuration button will reveal the following screen:

Figure 55: Configure NetWare Server (Bindery PS mode)

•The NetWare Print Server name is shown at the top of the screen. If more than 1 NetWare server is used, this name is the same on every NetWare server.

•The options available are :

File Server	This drop-down list will be operational only if you have assigned more
	than 1 file server to be serviced by the LevelOne Printer Server.
Printer	Create Printer Objects, assign Print Queues, and assign users to Print
	Queues (Required). See the following section for details.
Operator	Assign Operators to the NetWare Print Server object. (Optional)
	These operators will then have permission to manage the NetWare Print
	Server object. The screen is identical to Figure 59: Assign Operator to
	Queue (Bindery).
User	Assign Users to the NetWare Print Server object. (Optional)
	These users will then be able to view the status of the NetWare Print
	Server object. The screen is identical to Figure 58: Assign Users to
	Queue (Bindery).
Password	Change the login password used by the LevelOne Printer Server when it
	connects to the NetWare server. By default, there is no password. See
	Password for details.

- 83 -