LevelOne FPS-3003 user manual Set Administrator, User Accounts list

in session number.

-Set Passive Mode: select or clear Set Passive Mode support that FTP server can accept passive mode.

-Enable FTP Authentication: select or clear Enable FTP Authentication support. If you select the support, you need to type user name and password to login to the server. If you clear the support, you enter the server as anonymous login.

Enable SANE (Scanner Access Now Easy) Server: select or clear Enable SANE Server support. It is enabled in Factory Default and users may set the TCP port as follows:

-SANE Port: set SANE server’s TCP port (default: 6566)

User Accounts: You can change administrator name and password or add a FTP user account. If you forgot administrator name and password, you must to perform Restore Factory Default action by pressing Init button and plugging Power adaptor simultaneously. Please refer to Chapter 13 Restore Factory Default.

Set Administrator

New Administrator: type your desired administrator name.

New Password: type your desired password.

Retype Password: confirm your previous password typing.

User Accounts list

User name: Administrator can add a new FTP user account for accessing the storage attached to FPS-3003.

Password: After entering the user name and corresponding password, click “Add”. The account will take effect once shown in the blank below.

58