Manuals / LevelOne / Computer Equipment / Server

LevelOne FPS-3003 user manual Default Parameters List, Host Information, Protocols, Snmp, Tcp/Ip

Models: FPS-3003

1 75

Download 75 pages 34.86 Kb

Page 67

Image 67

13.4 Default Parameters List

Host Information

Comment (Optional): FPS-3003 USB MFP Server

Host Name: FPS-3003

Workgroup: LevelOne

Code Page of File Server: Western European

Product ID: FPS-3003 xxxx, where xxxx represents the last 4 bytes of Ethernet address.

TCP/IP

Automatically get IP using DHCP

Default IP: 192.168.1.100

Default Subnet Mask: 255.255.255.0

Protocols

Enable SMB Print/File Server

Enable IPP Printing

Enable LPR Printing

Device: FPS-3003

Port Name:

-USB1_LPR (queue name: USB1_LQ)

-USB2_LPR (queue name: USB2_LQ) Enable Raw TCP Printing

Device: FPS-3003 Port Name:

-USB1_RAW: TCP port 9100

-UBB2_RAW: TCP port 9101

Enable SANE Server

SANE Port: 6566

FTP Server

FTP Port: 21

Passive Mode: Disabled

Set Maximum Session Number: Disabled

FTP Authentication: Disabled

SNMP

Authentic Community: public

Trap Community: public

Page 67

Image 67

LevelOne FPS-3003 user manual Default Parameters List, Host Information, Protocols, Snmp, Tcp/Ip

Contents

User`s Manual FPS-3003LevelOne 2-port USB/MFP ServerCHAPTER2 Table of ContentsBASIC INSTALLATION CHAPTER1CHAPTER7 CHAPTER5 ADDING PRINTERS IN UNIX/LINUXCHAPTER6 FILE SERVER FUNCTIONDisplay Server Status 8.2.3 Set up Server’s Configuration9.2.2 Set up Server Configuration 9.2.1Chapter1 Introduction 1.2 Support Services1.1 About this Manual 2.2 FPS-3003 USB MFP Server Product CD 2.1 Package Contents2.2.1 Start-up Procedures for Windows Chapter2 Product Overview2.3.3 Init Button 2.3.1 Ethernet Connector2.3.4 Indicators 2.3.2 USB Host Ports2.4.2 Configuration and Management 2.4 Installation Methods2.5 Features and Benefits 2.4.1 Installation and IntegrationPage 3.2.1 Preliminary Chapter3 Basic Installation3.1 Connecting the Hardware 3.2 Assigning an IP Address to the MFP Server3.2.5 Host Names and Host Name Rules 3.2.4 Methods for Setting the IP Address3.2.6 Set the IP Address Using DHCP 3.2.3 IP Address3.2.7 Set the IP Address Using LevelOne MFP Control Center 3.2.8 Set the IP Address Using Server’s Web Pages 3. Go to the web page and click TCP/IP icon 4. Login your administrator default admin and password default adminSet Printer Name Default Printer Name3.3 Naming Your USB Devices 3.3.1 Printer Names5. Set your printer names in Printer Name box and then click Apply ii. Using Server’s Web Pages2. Login your administrator default admin and password default admin then you have to select a MFP server from the server list3.3.3 Scanner Names 3.3.2 Storage NamesChapter4 Adding Printers in Windows 4.1 Overview of Installation MethodsTable List for Installing Network Printer Steps for Installing Network Printer4.2.2 MFP Server and Windows PC on Different LANs 4.2 Connecting FPS-3003 MFP Server1. Wired Windows PC across Internet 4.2.1 MFP Server and Windows PC on Same LAN2. Wireless Windows PC 4.3 Setting up Local Windows Printer Driver4.4 Adding Network Printers in Windows If your server is running on a different LAN than your 4.4.1 Using Standard Windows Methods for SMB Printing Protocol4.4.2 Using LevelOne MFP Control Center Tool for SMB Printing 4.4.3 Using Standard Windows Methods for LPR Printing Protocol 6. Click Next 7. Click Custom/settings 9. Click OK to finish 4.4.4 Using LevelOne MFP Control Center Tool for LPR PrintingWindows Platform Windows 2000, XP and 3. Click Apply 4.4.5 Using Standard Windows Method for Raw TCP Printing 7. Click Custom/settings 4.4.6 Using LevelOne MFP Control Center for Raw TCP Printing port box 4.4.7 Using Standard Windows Method for IPP Printing3. In this window, select A network printer, or a printer attached to another computer and click NextIf your server is running on a different LAN than your For example, http//FPS-3003/psc 1310 ser5.2 Printing by LPD/LPR 5.1 Configuring Host File# login root Chapter5 Adding Printers in Unix/LinuxA. Use the lp command 5.3 Using FPS-3003 on BSD UNIX/Linux# lp -d Printer1 Print file name # lp -d Printer2 Print file name # login root# lp -d Printer1 Print file name # lp -d Printer2 Print file name 5.4 Using RedHat Linux Printer System Manager# lpr -P Printer1 print file name # lpr -P Printer2 Print file name Remote Host FPS-3003 or IP address of MFP server# lpr -P Printer1 print file name # lpr -P Printer2 Print file name B. Use the “lpr” command6.2 Storage Names 6.3 Connecting USB Mass Storage to FPS-3003Chapter6 File Server Function 6.1 PreliminaryFilename Encoding of FAT File System What is codepage?Configuring FPS-3003 Codepages 6.4 Supported Code Pages1. Go to the web page, click Config - General Configuration icon ii. Using Server’s Web Pages2. Login your administrator default admin and password default admin 3. Click Display the Computers of Workgroup 6.5 Sharing Your USB Mass Storages6.5.1 Use Shared Storages by SMB Method for Windows 2. Select My Network Places6.5.2 Use Shared Storage by FTP Methods for Windows 4. Perform FTP commands to use this FTP server Chapter7 Scan Server Function 7.1 Connecting HP Office Jets to MFP Server7.2 Using the Shared Scanner in Windows 7.2.1 Using LevelOne MFP Control Center Tool2. Select your scanner for USB1 port or USB2 port Mode choose lineart black/white, Gray and color modeResolution choose the image resolution 5. Adjust the window size to be scanned 6. Click Scan buttonExample Using Photoshop 7.2.2 Using Windows Applications1. Start Photoshop, click File -Import-FPS-3003 Network Scanner 7. Click Scan button 3. Click Connect to Network Scanner button in Server Information box5. Click Preview button 6. Adjust the window size to be scanned 4. Select your scanner in Server Information boxChapter8 LevelOne MFP Control Center 8.1 Installing Your LevelOne MFP Control Center8.2 Using LevelOne MFP Control Center 1. Click Install Product buttonTCP/IP 8.2.3 Set up Server’s Configuration General ConfigurationEnable LPR Line Printer Remote Printing select or 8.2.2 Display Server’s StatusFTP Port type an integer number to set FTP server’s TCP port default clear Enable LPR Printing support. It is enabled in Factory DefaultTCP Port 1 set TCP port for the printer of USB1 port default TCP Port 2 set TCP port for the printer of USB2 port defaultTCP port as follows SANE Port set SANE server’s TCP port default User Accounts list Set AdministratorSet SNMP Configuration Set Email Configuration Restart Server click the button, the server will be restarted 9.2.1 Display Server Status 9.2 Using Server’s Web PagesChapter 9 MFP Server’s Web Pages 9.1 IntroductionGeneral Configuration 9.2.2 Set up Server ConfigurationTCP/IP User Accounts list Set AdministratorSet SNMP Configuration Enable SNMP V3 select or clear Enable SnmpV3 support Download New Firmware from Web Site click the button and you can download new firmware or user software from product’s public web site Chapter 11 SNMP Chapter 10 Email AlertingUSB Device Status Chapter 12 Troubleshooting12.1 LED Indicators IndicatorsThere are errors in network File ErrorThere are errors in network Error13.1 Using Server’s Web Pages Chapter13 Restore Factory Default3. Click Factory Default 13.3 Using Init Button 13.2 Using LevelOne MFP Control Center5. Click Factory Default SNMP 13.4 Default Parameters ListHost Information ProtocolsSysContact sales@LevelOne.com SysName FPS-3003 USB MFP Server User AccountEnableAuthenTrap 2 disable Administratoradmin Password adminProcedure A Using PC User Software Chapter14 Upgrade New FirmwareProcedure B Using Server’s Web Pages 4. Click Upload Image Procedure C Using Init Button and TFTP ClientInit Button Chapter15Chapter16 Technical SpecificationsSupported Web Browsers Included AccessoriesScan Server Supported Systems Supported ProtocolsMFP Series Chapter17 Appendix17.1 Compatibility List ModelLaser Printer most PCL black & white and color printers series, 7700 series, 7900 series