Manuals / LevelOne / Computer Equipment / Server

LevelOne FPS-3003 user manual Procedure C Using Init Button and TFTP Client, Click Upload Image

Models: FPS-3003

1 75

Download 75 pages 34.86 Kb

Page 70

Procedure C: Using Init Button and TFTP Client

automatically search FPS-3003 on the LAN. Then FPS-3003's IP address will be shown in control center.

4.Run any web browser, like Microsoft Internet Explorer. Go to http://a.b.c.d to access FPS-3003's home page, where a.b.c.d is FPS-3003's IP address.

5.Click "Maintenance" at the left side menu.

6.Login FPS-3003 with administrator "admin" and password "admin".

7.Click "Upgrade Firmware".

8.Click "Browse" button to choose the file of new FPS-3003 firmware.

9.Click "Upload" button to start firmware upgrade.

10.Wait about 15 seconds for system reboot.

Procedure C: Using Init Button and TFTP Client

1.Simultaneously press Init button and power on (plug the power adaptor line) the server until LED indicators of Power, USB1 and USB2 blink. After that, the servers will operate using the factory default values after next restarts.

2.Start the TFTP client Tool which contains in the CD-Rom: Image Burner

3.Type the server’s Fallback IP address: 192.168.1.100 and click Open Image to open your new firmware.

4.Click Upload Image

70

Image 70

LevelOne FPS-3003 user manual Procedure C Using Init Button and TFTP Client, Click Upload Image

Contents

2-port USB/MFP Server FPS-3003LevelOne User`s ManualCHAPTER1 Table of ContentsBASIC INSTALLATION CHAPTER2FILE SERVER FUNCTION CHAPTER5 ADDING PRINTERS IN UNIX/LINUXCHAPTER6 CHAPTER79.2.1 8.2.3 Set up Server’s Configuration9.2.2 Set up Server Configuration Display Server StatusChapter1 Introduction 1.2 Support Services1.1 About this Manual Chapter2 Product Overview 2.1 Package Contents2.2.1 Start-up Procedures for Windows 2.2 FPS-3003 USB MFP Server Product CD2.3.2 USB Host Ports 2.3.1 Ethernet Connector2.3.4 Indicators 2.3.3 Init Button2.4.1 Installation and Integration 2.4 Installation Methods2.5 Features and Benefits 2.4.2 Configuration and ManagementPage 3.2 Assigning an IP Address to the MFP Server Chapter3 Basic Installation3.1 Connecting the Hardware 3.2.1 Preliminary3.2.3 IP Address 3.2.4 Methods for Setting the IP Address3.2.6 Set the IP Address Using DHCP 3.2.5 Host Names and Host Name Rules3.2.7 Set the IP Address Using LevelOne MFP Control Center 3.2.8 Set the IP Address Using Server’s Web Pages 4. Login your administrator default admin and password default admin 3. Go to the web page and click TCP/IP icon3.3.1 Printer Names Default Printer Name3.3 Naming Your USB Devices Set Printer Namethen you have to select a MFP server from the server list ii. Using Server’s Web Pages2. Login your administrator default admin and password default admin 5. Set your printer names in Printer Name box and then click Apply3.3.2 Storage Names 3.3.3 Scanner NamesSteps for Installing Network Printer 4.1 Overview of Installation MethodsTable List for Installing Network Printer Chapter4 Adding Printers in Windows4.2.1 MFP Server and Windows PC on Same LAN 4.2 Connecting FPS-3003 MFP Server1. Wired Windows PC across Internet 4.2.2 MFP Server and Windows PC on Different LANs2. Wireless Windows PC 4.3 Setting up Local Windows Printer Driver4.4 Adding Network Printers in Windows 4.4.1 Using Standard Windows Methods for SMB Printing Protocol If your server is running on a different LAN than your4.4.2 Using LevelOne MFP Control Center Tool for SMB Printing 4.4.3 Using Standard Windows Methods for LPR Printing Protocol 6. Click Next 7. Click Custom/settings 9. Click OK to finish 4.4.4 Using LevelOne MFP Control Center Tool for LPR PrintingWindows Platform Windows 2000, XP and 3. Click Apply 4.4.5 Using Standard Windows Method for Raw TCP Printing 7. Click Custom/settings 4.4.6 Using LevelOne MFP Control Center for Raw TCP Printing attached to another computer and click Next 4.4.7 Using Standard Windows Method for IPP Printing3. In this window, select A network printer, or a printer port boxFor example, http//FPS-3003/psc 1310 ser If your server is running on a different LAN than yourChapter5 Adding Printers in Unix/Linux 5.1 Configuring Host File# login root 5.2 Printing by LPD/LPR# login root 5.3 Using FPS-3003 on BSD UNIX/Linux# lp -d Printer1 Print file name # lp -d Printer2 Print file name A. Use the lp commandRemote Host FPS-3003 or IP address of MFP server 5.4 Using RedHat Linux Printer System Manager# lpr -P Printer1 print file name # lpr -P Printer2 Print file name # lp -d Printer1 Print file name # lp -d Printer2 Print file nameB. Use the “lpr” command # lpr -P Printer1 print file name # lpr -P Printer2 Print file name6.1 Preliminary 6.3 Connecting USB Mass Storage to FPS-3003Chapter6 File Server Function 6.2 Storage Names6.4 Supported Code Pages What is codepage?Configuring FPS-3003 Codepages Filename Encoding of FAT File System1. Go to the web page, click Config - General Configuration icon ii. Using Server’s Web Pages2. Login your administrator default admin and password default admin 2. Select My Network Places 6.5 Sharing Your USB Mass Storages6.5.1 Use Shared Storages by SMB Method for Windows 3. Click Display the Computers of Workgroup6.5.2 Use Shared Storage by FTP Methods for Windows 4. Perform FTP commands to use this FTP server 7.2.1 Using LevelOne MFP Control Center Tool 7.1 Connecting HP Office Jets to MFP Server7.2 Using the Shared Scanner in Windows Chapter7 Scan Server Function5. Adjust the window size to be scanned 6. Click Scan button Mode choose lineart black/white, Gray and color modeResolution choose the image resolution 2. Select your scanner for USB1 port or USB2 portExample Using Photoshop 7.2.2 Using Windows Applications1. Start Photoshop, click File -Import-FPS-3003 Network Scanner 4. Select your scanner in Server Information box 3. Click Connect to Network Scanner button in Server Information box5. Click Preview button 6. Adjust the window size to be scanned 7. Click Scan button1. Click Install Product button 8.1 Installing Your LevelOne MFP Control Center8.2 Using LevelOne MFP Control Center Chapter8 LevelOne MFP Control Center8.2.2 Display Server’s Status 8.2.3 Set up Server’s Configuration General ConfigurationEnable LPR Line Printer Remote Printing select or TCP/IPTCP Port 2 set TCP port for the printer of USB2 port default clear Enable LPR Printing support. It is enabled in Factory DefaultTCP Port 1 set TCP port for the printer of USB1 port default FTP Port type an integer number to set FTP server’s TCP port defaultTCP port as follows SANE Port set SANE server’s TCP port default Set Administrator User Accounts listSet SNMP Configuration Set Email Configuration Restart Server click the button, the server will be restarted 9.1 Introduction 9.2 Using Server’s Web PagesChapter 9 MFP Server’s Web Pages 9.2.1 Display Server Status9.2.2 Set up Server Configuration General ConfigurationTCP/IP Set Administrator User Accounts listSet SNMP Configuration Enable SNMP V3 select or clear Enable SnmpV3 support Download New Firmware from Web Site click the button and you can download new firmware or user software from product’s public web site Chapter 10 Email Alerting Chapter 11 SNMPIndicators Chapter 12 Troubleshooting12.1 LED Indicators USB Device StatusError ErrorThere are errors in network There are errors in network File13.1 Using Server’s Web Pages Chapter13 Restore Factory Default3. Click Factory Default 13.3 Using Init Button 13.2 Using LevelOne MFP Control Center5. Click Factory Default Protocols 13.4 Default Parameters ListHost Information SNMPAdministratoradmin Password admin User AccountEnableAuthenTrap 2 disable SysContact sales@LevelOne.com SysName FPS-3003 USB MFP ServerProcedure A Using PC User Software Chapter14 Upgrade New FirmwareProcedure B Using Server’s Web Pages Procedure C Using Init Button and TFTP Client 4. Click Upload ImageChapter15 Init ButtonTechnical Specifications Chapter16Supported Protocols Included AccessoriesScan Server Supported Systems Supported Web BrowsersModel Chapter17 Appendix17.1 Compatibility List MFP Seriesseries, 7700 series, 7900 series Laser Printer most PCL black & white and color printers