Local netmask, Remote subnet, Remote netmask | LevelOne WBR-3403TX

Local netmask

Local netmask combined with local subnet to form a subnet domain.

Remote subnet

The subnet of LAN site of remote VPN gateway, it can be a host, a partial subnet, and the whole subnet of LAN site of remote gateway.

Remote netmask

Remote netmask combined with remote subnet to form a subnet domain of remote end.

Remote gateway

The IP address of remote VPN gateway.

Pre-shared key

The first key that supports IKE mechanism of both VPN gateways for negotiating further security keys. The pre-shared key must be same for both end gateways.

Function of Buttons

Select IKE proposal: Click the button to setup a set of frequent-used IKE proposals and select from the set of IKE proposals for the dedicated tunnel. proposals for the dedicated tunnel.

Select IPSec proposal: Click the button to setup a set of frequent-used IPSec proposalsand select from the set of IKE proposals for the dedicated tunnel.

50

Image 50

LevelOne WBR-3403TX user manual Local netmask, Remote subnet, Remote netmask, Remote gateway, Pre-shared key

Contents

LevelOne Copyright Trademarks FCC Interference Statement CE Declaration of Conformity Table of Contents Firmware Upgrade Functions and Features User-Definable Application Sensing Tunnel Universal Plug and Play UPnP supportedVirtual Server supported DMZ Host supported 802.1X supported Packing ListPanel Layout Front Panel Wlan Reset Rear Panel Procedure for Hardware InstallationDecide where to place your Wireless Broadband Router Connecting this product with your printer Setup LAN connectionSetup WAN connection Power on Make Correct Network Settings of Your Computer Install the Software into Your ComputersPage Page Page Configuring LevelOne WBR-3403TX Start-up and Log Status Wizard Page Basic Setting Primary Setup WAN Type, Virtual Computers Press Change Static IP Address Dynamic IP Address PPP over Ethernet PptpPage Virtual Computers Dhcp Server Press MorePage Wireless Setting, and 802.1X setting Radius Server 802.1XEncryption Key Length Radius Shared Key Change Password Forwarding Rules Virtual Server Special AP IP Address of DMZ Host UPnP SettingMiscellaneous Items Non-standard FTP port Security Settings Packet Filter Inbound Filter Example They can do everything block nothing Others are all blocked Example Page Domain Filter Example URL Blocking Enable URL BlockingPage MAC Address Control IP Address Control tableMAC Address ∙ Tunnel name VPN setting∙ Max. number of tunnels item ∙ Method Function of Buttons ∙VPN Settings IKEBasic setup Local subnet Remote netmask Local netmaskRemote subnet Remote gateway ∙VPN Settings Set IKE Proposal Encapsulation protocol ∙VPN Settings -Set IPSec ProposalIPSec Proposal index IPSec proposal Discard Ping from WAN side Remote Administrator Host/PortAdministrator Time-out Advanced Setting Time Server System TimeGet Date and Time by NTP Protocol Time Zone IP Address for Syslog Mail Alert EnableSystem Log Smtp Server IP and Port Dynamic DNS Mail Subject Example Get Community Snmp SettingEnable Snmp Set CommunityPage Routing Table Page Toolbox You can View system log by clicking the View Log button Firmware Upgrade Reboot Backup SettingReset to default MAC Address for Wake-on-LAN Domain Name or IP address for Ping Test Configuring on Windows 95/98 Platforms Print ServerPage Page Configuring on Windows NT Platforms Configuring on Windows 2000 and XP Platforms Select Ports page, Click Add Port… Page Select Custom, then click Settings… Page Apply your settings Page Configuring on Unix based Platforms Appendix a TCP/IP Configuration for Windows 95/98 Install TCP/IP Protocol into Your PC Set TCP/IP Protocol for Working with NAT Router Page Page Don’t input any value in the Gateway tab Choose Disable DNS in the DNS Configuration tab Page