LevelOne WBR-3403TX instruction

3.Choose the “PRTmate: (All-in-1)”from the list attached at the Print To item. Be sure that the Printer Driver item is configured to the correct driver of your server printer.

4.Click on the button of Port Settings:

Type in the IP address of this product and then click the OK button.

5.Make sure that all settings mentioned above are correct and then click the OK button.

71

Image 71

LevelOne WBR-3403TX user manual

Contents

LevelOne Trademarks Copyright CE Declaration of Conformity FCC Interference Statement Table of Contents Firmware Upgrade Functions and Features DMZ Host supported Universal Plug and Play UPnP supportedVirtual Server supported User-Definable Application Sensing Tunnel Front Panel Packing ListPanel Layout 802.1X supported Wlan Reset Rear Panel Procedure for Hardware InstallationDecide where to place your Wireless Broadband Router Power on Setup LAN connectionSetup WAN connection Connecting this product with your printer Install the Software into Your Computers Make Correct Network Settings of Your ComputerPage Page Page Start-up and Log Configuring LevelOne WBR-3403TX Status Wizard Page Basic Setting Primary Setup WAN Type, Virtual Computers Press Change Dynamic IP Address Static IP Address Pptp PPP over EthernetPage Virtual Computers Press More Dhcp ServerPage Wireless Setting, and 802.1X setting Radius Shared Key 802.1XEncryption Key Length Radius Server Change Password Forwarding Rules Virtual Server Special AP Non-standard FTP port UPnP SettingMiscellaneous Items IP Address of DMZ Host Security Settings Packet Filter Example Inbound Filter They can do everything block nothing Others are all blocked Example Page Domain Filter Example URL Blocking URL Blocking EnablePage MAC Address Control IP Address Control tableMAC Address ∙ Method VPN setting∙ Max. number of tunnels item ∙ Tunnel name Function of Buttons ∙VPN Settings IKEBasic setup Local subnet Remote gateway Local netmaskRemote subnet Remote netmask ∙VPN Settings Set IKE Proposal Encapsulation protocol ∙VPN Settings -Set IPSec ProposalIPSec Proposal index IPSec proposal Discard Ping from WAN side Remote Administrator Host/PortAdministrator Time-out Advanced Setting Time Zone System TimeGet Date and Time by NTP Protocol Time Server Smtp Server IP and Port Mail Alert EnableSystem Log IP Address for Syslog Mail Subject Dynamic DNS Example Set Community Snmp SettingEnable Snmp Get CommunityPage Routing Table Page Toolbox You can View system log by clicking the View Log button Firmware Upgrade Reboot Backup SettingReset to default Domain Name or IP address for Ping Test MAC Address for Wake-on-LAN Print Server Configuring on Windows 95/98 PlatformsPage Page Configuring on Windows NT Platforms Configuring on Windows 2000 and XP Platforms Select Ports page, Click Add Port… Page Select Custom, then click Settings… Page Apply your settings Page Configuring on Unix based Platforms Install TCP/IP Protocol into Your PC Appendix a TCP/IP Configuration for Windows 95/98 Set TCP/IP Protocol for Working with NAT Router Page Page Don’t input any value in the Gateway tab Choose Disable DNS in the DNS Configuration tab Page