MAC Address for Wake-on-LAN | LevelOne WBR-3403TX specs

4.8.6 Miscellaneous Items

MAC Address for Wake-on-LAN

Wake-on-LAN is a technology that enables you to power up a networked device remotely. In order to enjoy this feature, the target device must be Wake-on-LAN enabled and you have to know the MAC address of this device, say 00-11-22-33-44-55. Clicking "Wake up" button will make the router to send the wake-up frame to the target device immediately.

Domain Name or IP address for Ping Test

Allow you to configure an IP, and ping the device. You can ping a specific IP to test whether it is alive.

68

Image 68

LevelOne WBR-3403TX user manual MAC Address for Wake-on-LAN, Domain Name or IP address for Ping Test

Contents

LevelOne Copyright Trademarks FCC Interference Statement CE Declaration of Conformity Table of Contents Firmware Upgrade Functions and Features Universal Plug and Play UPnP supported Virtual Server supportedUser-Definable Application Sensing Tunnel DMZ Host supported Packing List Panel Layout802.1X supported Front Panel Wlan Reset Rear Panel Procedure for Hardware InstallationDecide where to place your Wireless Broadband Router Setup LAN connection Setup WAN connectionConnecting this product with your printer Power on Make Correct Network Settings of Your Computer Install the Software into Your ComputersPage Page Page Configuring LevelOne WBR-3403TX Start-up and Log Status Wizard Page Basic Setting Primary Setup WAN Type, Virtual Computers Press Change Static IP Address Dynamic IP Address PPP over Ethernet PptpPage Virtual Computers Dhcp Server Press MorePage Wireless Setting, and 802.1X setting 802.1X Encryption Key LengthRadius Server Radius Shared Key Change Password Forwarding Rules Virtual Server Special AP UPnP Setting Miscellaneous ItemsIP Address of DMZ Host Non-standard FTP port Security Settings Packet Filter Inbound Filter Example They can do everything block nothing Others are all blocked Example Page Domain Filter Example URL Blocking Enable URL BlockingPage MAC Address Control IP Address Control tableMAC Address VPN setting ∙ Max. number of tunnels item∙ Tunnel name ∙ Method Function of Buttons ∙VPN Settings IKEBasic setup Local subnet Local netmask Remote subnetRemote netmask Remote gateway ∙VPN Settings Set IKE Proposal Encapsulation protocol ∙VPN Settings -Set IPSec ProposalIPSec Proposal index IPSec proposal Discard Ping from WAN side Remote Administrator Host/PortAdministrator Time-out Advanced Setting System Time Get Date and Time by NTP ProtocolTime Server Time Zone Mail Alert Enable System LogIP Address for Syslog Smtp Server IP and Port Dynamic DNS Mail Subject Example Snmp Setting Enable SnmpGet Community Set CommunityPage Routing Table Page Toolbox You can View system log by clicking the View Log button Firmware Upgrade Reboot Backup SettingReset to default MAC Address for Wake-on-LAN Domain Name or IP address for Ping Test Configuring on Windows 95/98 Platforms Print ServerPage Page Configuring on Windows NT Platforms Configuring on Windows 2000 and XP Platforms Select Ports page, Click Add Port… Page Select Custom, then click Settings… Page Apply your settings Page Configuring on Unix based Platforms Appendix a TCP/IP Configuration for Windows 95/98 Install TCP/IP Protocol into Your PC Set TCP/IP Protocol for Working with NAT Router Page Page Don’t input any value in the Gateway tab Choose Disable DNS in the DNS Configuration tab Page