LevelOne WBR-3403TX specification

5.Select Microsoft item in the manufactures list. And choose TCP/IP in the Network Protocols. Click OK button to return to Network window.

6.The TCP/IP protocol shall be listed in the Network window. Click OK to complete the install procedure and restart your PC to enable the TCP/IP protocol.

A.2 Set TCP/IP Protocol for Working with NAT Router

1.Click Start button and choose Settings, then click Control Panel.

82

Image 82

LevelOne WBR-3403TX user manual Set TCP/IP Protocol for Working with NAT Router

Contents

LevelOne Copyright Trademarks FCC Interference Statement CE Declaration of Conformity Table of Contents Firmware Upgrade Functions and Features User-Definable Application Sensing Tunnel Universal Plug and Play UPnP supportedVirtual Server supported DMZ Host supported 802.1X supported Packing ListPanel Layout Front Panel Wlan Reset Decide where to place your Wireless Broadband Router Procedure for Hardware InstallationRear Panel Connecting this product with your printer Setup LAN connectionSetup WAN connection Power on Make Correct Network Settings of Your Computer Install the Software into Your ComputersPage Page Page Configuring LevelOne WBR-3403TX Start-up and Log Status Wizard Page Basic Setting Primary Setup WAN Type, Virtual Computers Press Change Static IP Address Dynamic IP Address PPP over Ethernet PptpPage Virtual Computers Dhcp Server Press MorePage Wireless Setting, and 802.1X setting Radius Server 802.1XEncryption Key Length Radius Shared Key Change Password Forwarding Rules Virtual Server Special AP IP Address of DMZ Host UPnP SettingMiscellaneous Items Non-standard FTP port Security Settings Packet Filter Inbound Filter Example They can do everything block nothing Others are all blocked Example Page Domain Filter Example URL Blocking Enable URL BlockingPage MAC Address Control MAC Address Control tableIP Address ∙ Tunnel name VPN setting∙ Max. number of tunnels item ∙ Method Basic setup Local subnet ∙VPN Settings IKEFunction of Buttons Remote netmask Local netmaskRemote subnet Remote gateway ∙VPN Settings Set IKE Proposal IPSec Proposal index ∙VPN Settings -Set IPSec ProposalEncapsulation protocol IPSec proposal Administrator Time-out Remote Administrator Host/PortDiscard Ping from WAN side Advanced Setting Time Server System TimeGet Date and Time by NTP Protocol Time Zone IP Address for Syslog Mail Alert EnableSystem Log Smtp Server IP and Port Dynamic DNS Mail Subject Example Get Community Snmp SettingEnable Snmp Set CommunityPage Routing Table Page Toolbox You can View system log by clicking the View Log button Firmware Upgrade Reset to default Backup SettingReboot MAC Address for Wake-on-LAN Domain Name or IP address for Ping Test Configuring on Windows 95/98 Platforms Print ServerPage Page Configuring on Windows NT Platforms Configuring on Windows 2000 and XP Platforms Select Ports page, Click Add Port… Page Select Custom, then click Settings… Page Apply your settings Page Configuring on Unix based Platforms Appendix a TCP/IP Configuration for Windows 95/98 Install TCP/IP Protocol into Your PC Set TCP/IP Protocol for Working with NAT Router Page Page Don’t input any value in the Gateway tab Choose Disable DNS in the DNS Configuration tab Page