Lexmark 1020 manual Diagnostic Aids

4078-00X

3. Diagnostic Aids

Use these diagnostic test procedures to verify a repair. The test procedures are entered by pressing and holding a button, or buttons, as you turn on the printer. To begin the test, hold the buttons until both the operator panel lights come on and then release the buttons after five seconds. Some tests require the End-of-Form Flag to be out of the sensor.

To remove the End-of-Form Flag from the sensor:

1.Open the sheet feeder.

2.Place a sheet of paper in the paper path until the End-of-Form Flag is tripped.

To terminate the test, turn the printer off.

Diagnostic Aids 3-1