Lexmark T652, 30G2127, 30G0108 Reattach envelope feeder, Remote Management Active do not Power OFF

•Press to clear the message and print without using the specified bins.

Reattach envelope feeder

Try one or more of the following:

•Turn the printer off and then back on. If the error occurs a second time:

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Remove the envelope feeder.

4 Reattach the envelope feeder.

5 Connect the power cord to a properly grounded outlet.

6 Restart the printer. If the error occurs again: 1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Remove the envelope feeder.

4 Contact Customer Support.

•Press to clear the message and print without using the envelope feeder.

Remote Management Active DO NOT POWER OFF

The printer settings are being configured. Wait for the message to clear.

Warning—Potential Damage: Do not turn the printer power off while Remote Management Active appears on the display.

Remove packaging material, check <x>

Remove any remaining packaging material from the specified location.

Remove paper from all bins

Remove the paper from all of the bins. The printer automatically senses paper removal and resumes printing. If removing the paper does not clear the message, then touch Continue.

Remove paper from bin <x>

Remove the paper from the specified bin. The printer automatically senses paper removal and resumes printing. If removing the paper does not clear the message, then touch Continue.

Remove paper from standard output bin

Remove the stack of paper from the standard exit bin.

Understanding printer messages

157