Paper Feed Service Check
If your machine does not have paper jam problems, go on to the ser- vice check. If your machine does have a paper jam problem, exam- ine it for the following before you begin the service check.
•
•
•
•
•
Check the entire paper path for obstructions. Make sure there is not too much paper in the ASF. Make sure the correct type of paper is in the machine. Check for static in the paper.
Make sure the rear of the carrier guide is on top of the paper guide.
| FRU OR PROCEDURE | ACTION |
|
|
|
1 | System Board | With J5 disconnected and power on, |
|
| check for +24 V dc between |
|
| ground, and between |
|
| ground on the system board. If the |
|
| voltage is not present, check for |
|
| motor pins shorted to the motor hous- |
|
| ing. If you find a shorted pin, replace |
|
| the motor. If you still have a failure |
|
| after replacing the motor, replace the |
|
| system board. |
|
|
|
14