| FRU OR PROCEDURE | ACTION |
|
|
|
5 | Print Head Cable | Be sure connector J1 is fully seated. |
|
| Check the cable for damage. |
|
|
|
6 | Encoder Strip | Perform the “Encoder Sensor Test” on |
| Print Head Cable, | page 27. If you cannot enter the test, |
| System Board | replace the system board. |
|
|
|
7 | Maintenance Station | A problem with the maintenance sta- |
|
| tion can cause carrier movement |
|
| problems at the right margin. Go to |
|
| the “Maintenance Station Service |
|
| Check” on page 12. |
|
|
|
Diagnostic Information 23
