Lexmark 854e MFP Connectivity, Optional Network Connections, Direct USB Printing and Scanning

Announcing Lexmark X854e MFP 5

network using the optional Lexmark Document Distributor software

•Account number, name, or fax number can be entered to interactively distribute paper and digital documents

yPredefined choices can be listed to simplify repetitive manual processes and reduce errors

Connectivity

•Ethernet 10/100BaseTX

•USB

•Parallel

Optional Network Connections

The following internal network option may be installed in the single available ISP slot.

•Optional RS-232-C Serial Card

Direct USB Printing and Scanning

Direct USB connectivity allows individuals to print or scan PDF, TIFF, and JPEG files directly to the MFP using an approved USB flash memory device. Through the MFP’s USB Direct interface located on the MFP operator panel, a user can simply insert the USB flash memory device, select the appropriate file and choose to print or scan the file on this specific MFP.

Direct USB requires a supported USB flash memory device. Lexmark has tested and approved the following USB flash memory devices.

•Lexar JumpDrive 2.0 Pro (256MB, 512MB, 1GB)

•SanDisk Cruzer mini (256MB, 512MB, 1GB)

Note: Testing of these devices does not imply endorsement of these specific brands.

While other USB flash drives have not been tested and therefore cannot be approved by Lexmark, these products may function if the storage device meets the following qualifications:

•Supports the USB 2.0 specification, specifically supporting the Full-Speed mode

•Use the FAT file system

In addition to the above hardware requirements, PDF files used with Direct USB printing must support PDF standard version 1.5 or earlier. PDF files with restricted printing permissions or encryption are not supported.

Optional External Network Connections

•802.11g Wireless Print Adapter – uses Ethernet port

Scanner Features

yUp to 55 ppm monochrome scan unit (black, simplex scanning)

yColor scanning at up to 27.5 ppm

yAutomatic 2-sided scanning

yLexmark MFP Utilities CD

yMaximum optical scan resolution

¾Black: 600 x 600 dpi

¾Color: 600 x 300 dpi

Copy

Job Setup

yCopy Quantity -- set number of copies from 1 to 999 -- scans original only once

ySpecial Copy Media -- select copy media loaded in the printer

yReduce or Enlarge -- scale image output from 25% to 400%

yImage Length or Width -- scale the image output from 25% to 400%

yPaper Saver – select 2-up or 4-up output from portrait or landscape

yDate and Time Stamp -- puts the date and time on the top of each copy page

yMessage Overlay -- adds a watermark (copy, draft, urgent, or confidential) to each page

Quality

yAutomatic image processing – scans single-sided copy documents at up to 55 scans per minute in black and 27.5 scans per minute in color

yLighter or Darker -- adjusts the copy output darkness

yEdge Erase -- eliminates smudges or information around the edge of the original document

yContent -- sets the scanner mode for text, mixed or photo or printed image

yGrayscale: Optimizes image for shades of gray

ySelect bit depth

Finishing

ySimplex or Duplex – copies on one or two sides of sheet – copy 1 to 1, 1 to 2, 2 to 1 or 2 to 2

yAdvanced Duplex -- capability available to set binding for landscape or portrait input and output

yCollate -- electronically collates copy output

ySeparator Page -- adds a separator page between each copy set

yStaple and Hole Punch -- with the finisher installed, copies can be stapled and hole punched

LEX05-250 Lexmark Confidential Until Announce