Lexmark E460dw, E462dtn MAKE SURE THE PAPER PATH IS CLEAR, THERE MAY BE EXCESS TONER IN THE PAPER PATH, Streaked vertical lines, THE TONER MAY SMEAR WHEN PAPER IS FED FROM A SPECIFIC SOURCE, THE TONER CARTRIDGE IS DEFECTIVE, MAKE SURE THE PAPER PATH IS CLEAR, THERE MAY BE EXCESS TONER IN THE PAPER PATH

THE TONER CARTRIDGE MAY BE DEFECTIVE
Replace the toner cartridge.
MAKE SURE THE PAPER PATH IS CLEAR
Paper could be caught between the photoconductor kit and the fuser. Check the paper path aroun d the fuser area.
CAUTION—HOT SURFACE: The fuser and the inside of the printer near the fuser may be hot. To reduce the
risk of injury from a hot component , allow the surface to cool be fore removing paper from this ar ea.
Clear any paper you see.
THERE MAY BE EXCESS TONER IN THE PAPER PATH
Contact Customer Supp ort.
Streaked vertical lines
These are possible solutions. Try one or more of the following:
THE TONER MAY SMEAR WHEN PAPER IS FED FROM A SPECIFIC SOURCE
From Print Properties, the Print dialog, or the printer cont rol panel, select another tray or feeder to feed paper for
the job.
THE TONER CARTRIDGE IS DEFECTIVE
Replace the toner cartridge.
MAKE SURE THE PAPER PATH IS CLEAR
Paper could be caught between the photoconductor kit and the fuser. Check the paper path aroun d the fuser area.
Warning—Potential Damage: Do not touch the photoconductor on the underside of the photocondu ctor kit.
Use the cartridge handle whenever you are holding the cartridge.
CAUTION—HOT SURFACE: The fuser and the inside of the printer near the fuser may be hot. To reduce the
risk of injury from a hot component , allow the surface to cool be fore removing paper from this ar ea.
Clear any paper you see.
THERE MAY BE EXCESS TONER IN THE PAPER PATH
Contact Customer Supp ort.
Troubleshooting
160