Installing a flash memory or firmware card
The system board has two connections for an optional flash memory or firmware card . Only one of each may be
installed, but the connectors are interchangeab le.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optiona l hardware or memory
devices sometime af ter setting up th e printer, then t urn the printer o ff, and unplug t he power cord fr om the
wall outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and
unplug any cables going into the printer.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch
something metal on the printer before touching any system board electronic components or connectors.
1Open the system board door.
2Unpack the card.
Note: Avoid touching the connection points along the edge of the card.
3Holding the card by its sides, align the card with the connector on the system board.
Additional printer setup
24