5 Manual configuration
The MarkNet N8050 internal wireless print server is shipped with default settings that let you configure it in
Because this configuration method does not use the Wireless Setup Utility or a direct USB connection to the computer, several of the wireless settings on both the computer and the network will need to be accessed. As a result, extensive knowledge of wireless network and computer settings will be needed to complete the configuration process.
Note: To configure the wireless print server by this method, the computer that is used to facilitate the configuration process must have a wireless network card.
Before configuring the wireless print server, make sure your printer has been set up correctly
•The internal wireless print server option card has been installed correctly in the printer.
•The toner or print cartridges are installed correctly.
•Paper has been loaded into the printer.
•The printer is turned on and ready to be installed.
For help setting up your printer, see your printer documentation.
Configuring the print server in Ad-Hoc mode
1Make sure the printer power light is on.
2Access and record the computer’s current wireless network parameters.
For information on accessing the current wireless network parameters, see the wireless network documentation, or contact your network support person.
Manual configuration
17
