WATCHING TV / CHANNEL CONTROL
19
WATCHING TV /CHANNEL CONTROL
GBed 1 - Bed 2 switch on patient remote. The position of the Bed 1 - Bed 2 switch must correspond to the
setting in the Installer’s menu. The switch above can be set by sliding it to the Bed 1 or Bed 2 position. On
the patient’s remote, the Bed 1 or Bed 2 position can be selected by using a paper clip or a ball-point pen
to slide the switch to the correct position.
Left position = Bed 1.
Right Position = Bed 2.
NOTE

USER REMOTE CONTROL BUTTON FUNCTIONS

A brief list of the buttons on the optional patient remote control and what they do.

Optional Patient
Remote Control
MUTE
Turns sound Off and On, while the picture
remains.
BANK
Press and repeat to select a Channel
Memory Bank - - 1, 2, 3, or 4 (Standby).
TIMER
Press repeatedly to select a preset time to
automatically shut the TV off.
[-] BUTTON
When selecting a digital broadcast
channel, key in the Main channel
number followed by the -> [-] -> then the
sub channel number. Analog channels do
not contain a sub channel number.
POWER
Turns TV On or Off.
INFO
Press to display current program information.
GUIDE
Use to view DTV program information.
FLASHBK (Flashback)
Use to return to the last channel viewed.
NUMBER BUTTONS
Use for direct channel entry.
CC (Closed Captioning)
Press to access closed captions.
ALARM
Use to go to the Alarm menu. Set a time for
the TV to turn itself on.
BED 1/BED 2 (*See Note Below)
Determines the code set transmitted, Bed 1
or Bed 2. Switch setting must correspond to
item 27, HOSPITAL MODE setting in the TV’s
Installer Menu.
VOLUME / CHANNEL / OK (Enter)
Increase or decrease sound level.
Select available channels.
Select on-screen menu items and change
menu values.
CHANNEL PREVIEW
Displays available TV channels, and (if
active) the Guest Parental Control menu:
set V-Chip blocks to restrict both analog
and digital programming.
• Aux Channel allows the guest to select
the Audio / Video inputs. (Use the A/V
jacks on the back of the TV as a source).
SAP
Selects MTS sound: Mono, Stereo, and
SAP in analog mode. Change the audio
language in DTV mode.