EXTERNAL EQUIPMENT SETUP
VCR SETUP
■To avoid picture noise (interference), leave an adequate distance between the VCR and TV. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all TVs and is not covered by warranty.
EXTERNAL EQUIPMENT SETUP
Antenna Connection
1. How to connect
1Connect the RF antenna out socket of the VCR to the ANTENNA IN socket on the TV.
2Connect the antenna cable to the RF antenna in socket of the VCR.
VIDEO | L | R | ANT OUT | |
OUTPUT |
|
| ANT IN | |
SWITCH |
|
|
|
|
Wall Jack | 2 |
1
ANTENNA IN
2. How to use | Antenna |
■ Set VCR output switch to 3 or 4 and then |
|
tune TV to the same channel number. |
|
■Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
22
