8ASSEMBLING AND PREPARING
ENGLISH
Installing the Monitor
Assembling the Stand
1Place the screen face down.
Stand Hinge
CAUTION
yy To protect the screen from scratches, cover the surface with a soft cloth.
2Mount the stand base onto the stand hinge as shown in the illustration. Fix two screws into the back of the stand base and close the screw cover.
Stand Base
or
100 mm
(3.9 inch)
Screw Cover
CAUTION
yy The stand height is adjustable by 20 mm (0.7 inch).
yy When tightening the screws after mounting the stand base onto the stand hinge, be sure to hold the stand base with your hand. Other- wise, the product may fall, causing personal injury or damage to the product.
yy Be careful not to hurt your hand on the edges of the screw covers.
yy Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be cov- ered by the product warranty.
yy If you use the monitor panel without the stand base, its joystick button may cause the monitor to become unstable and fall, result- ing in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.
120mm
(4.7 inch)
