HOW TO USE THE WASHER

1.Power

•Use this button to turn the Power On/Off.

2.Cycles

•Rotate the Cycle selector knob to select cycle designed for different types of fabric and soil levels.

•Each cycle has a preset Water Temperature, Spin Speed, Soil Level, and Option (See page 13).

•The preset settings can be changed anytime before Start.

NOTE: This front load washer requires longer cycle time and gets clothes much cleaner, yet is more gentle on the fabrics, than top load washers. Washing time can be reduced significantly for small loads or lightly soiled loads by selecting Speed Wash cycle and setting the Soil Level button at Light.

3.Start/Pause

•Use this button to start/stop the washer.

NOTE:

-If you do not press the Start/Pause button within 4 minutes of selecting a cycle, the washer automatically turns off.

-The LCD will darken after 4 minutes and will be restored when any button is pressed.

1 4

4.Delay DELAY WASH

•Allows the start of any cycle to be delayed for 1~19 hours.

•Choose the wash cycle for your load, and then press the Delay button once for one hour or press the button again to increase the delay wash time up to 19 hours in one hour increments, and then press the Start/Pause button.

5.Steam STEAM■Steam Wash

•For tough stained clothes, underwear, or baby clothes.

•Steam Wash is available with Sanitary, Bulky/Large, Perm. Press, Cotton/Normal, and Baby Wear cycles.

•This option features upgraded washing performance with low energy and water consumption.

•Do not load delicates such as wool, silk, and easily discolored clothes.

NOTE:

-Steam wash is a highly concentrated and efficient.It may seem there is no water inside the drum, but this is normal.

-Steam spray may not be seen clearly through the door; however, the washer is spraying steam strongly inside.

-During the steam operation, a spraying sound will be heard. This is not a malfunction.

!CAUTION:Do not reach into the washer while operating. Steam can cause severe burns.