HOW TO USE THE WASHER

SteamFreshTM cycle

For slightly wrinkled clothes which have been stored for an extended time. It makes wrinkled clothes easier to iron (Do not load wet clothes).

Wrinkles and odors will be reduced.To use the SteamFreshTM cycle :1.Turn on the washer and select the SteamFreshTM cycle.2.Load 5 items or less and close the door. NOTE: Wipe the water off the drum.

3.Press the Steam button repeatedly until the correct number of items is displayed.

4. Press the Start/Pause button.

After the SteamFreshTM cycle is complete, the drum will tumble for 30 minutes to prevent re-wrinkling. Press any button to unload the items. The Remote Laundry Monitor (RLM) will display “End” for 2 minutes and then will display “---” for 28 minutes.

After the SteamFreshTM cycle is complete, open the door and allow it to cool down for best results.

Precautionary Notes:-The SteamFreshTM cycle is not like other washing or drying cycles.

-Due to the characteristics of cotton fibers, this cycle is not recommended for 100% cotton clothing.

-Remove stains from clothing before using the SteamFreshTM cycle to prevent permanently setting the stains by high heat.

-Be sure the faucet is open. This cycle uses a little water to produce steam.-Be careful not to touch the door. It can be very hot.-Do not load the following items:

Wool, blankets, leather jackets, silk, wet clothes, lingerie, foam products, or electric blankets.

-After removing clothes from the SteamFreshTM cycle they may feel slightly damp. Wait at least 10 minutes before putting the clothes on.

-Best results are achieved when articles are of similar size and fabric type. Do not overload.

!CAUTION:-Do not reach into the washer while operating. Steam can cause severe burns.-Keep pets away from the washer.
6.Wash/Rinse TemperatureSelect a water temperature based on the type of load you are washing.Follow the fabric care label and chart below for best results.
Suggested Wash Temp.Garment

Extra Hot

Kitchen towels, sheets,

and baby garments

 

 

 

Hot

Whites and Heavy

soiled color-fast items

 

Warm

Most loads

 

 

Cold

Brightly colored items,

washable woolens

 

Warm rinses leave the loads dryer than cold rinses. Warm rinses increase wrinkling.

In cold climates, a warm rinse makes the load more comfortable to handle.Cold rinses save energy.The Cold rinse temperatures depend on the cold water at your faucet.

This washer automatically adjusts the water level for the type and size of wash load for best results. It may seem there is no water inside the drum in some cycles, but this is normal.

7.Spin speed (Drain/Spin cycle)

To change the spin speed, press the Spin Speed button repeatedly to cycle through available options.

To start Drain/Spin cycle:1.Press Power button to turn on.2.Press Spin Speed button only.3.Press Start/Pause button.8.Soil Level

To change the soil level, press the Soil Level button repeatedly until the desired setting is on.

9. Beeper• Press repeatedly to adjust the volume of the Beeper.

1 5

ENGLISH