TROUBLESHOOTING GUIDE
Problem
F
Possible Cause | Solution |
• Water supply is not adequate | Check another tap in the house. |
in area. |
|
• Water supply taps are not | Fully open tap. |
completely open. |
|
• Water inlet hose is bent. | Straighten hose. |
• The filter of the inlet hose | Check the filter of the inlet hose. |
clogged. |
|
• Drain hose is bent | Clean and straighten the drain hose. |
or clogged. |
|
• The drain filter is clogged. | Clean the drain filter. |
• Load is too small. | Add 1 or 2 similar items to help |
• Load is out of balance. | balance the load. |
• The appliance has an imbalance | Rearrange load to allow proper |
detection and correction system. | spinning. |
If individual heavy articles are |
|
loaded (bath mat, bath robe, |
|
etc.) and the imbalance is too |
|
great, after several attempts to |
|
restart the spin cycle the |
|
machine will stop and the error |
|
code will be displayed. |
|
• Is the door opened or not | Close the door completely. |
completely closed? | If it is not released, call for service. |
| Unplug the power plug and call for service. | |
• The water overfills due to the | Close the water tap. | |
faulty water valve. | Unplug the power plug. | |
| Call for service. | |
• The water level sensor |
| |
malfunction. |
| |
• Overload in motor. | Restart the cycle after 30 minutes. If LE is | |
not released, call for service. | ||
| ||
• The washer experienced a | Restart the cycle. | |
| ||
power failure. |
|
2 2