IBM 4986B LanProbe manual CONFIG Button, Included Parts, 3 Front Panel LEDs

Introduction

LanProbe Overview

Figure 1-3: Front Panel LEDs

CONFIG Button

The CONFIG button is used to configure LanProbe from a terminal or to restart the probe. The CONFIG button is recessed and located on the back of the probe near the RS-232C connector. You will need to use a narrow, pointed object (like a pen) to press the CONFIG button.

To configure LanProbe using a local terminal (or PC emulating a terminal), connect a terminal to LanProbe using a null modem cable and push the CONFIG button to display LanProbe’s Main Menu. This operation is described in Chapter 2 “Local Terminal Configuration”.

You can restart the probe (with a warm start or cold start) using the CONFIG button. These functions are described in Chapter 5 “LanProbe Operation”.

Included Parts

The following items are included with your :Agilent 4986B Ethernet LanProbe:

11