IBM 4986B LanProbe manual 12 LanProbe Installed in the Rack Support Shelf

Installation

Installing the Probe

8.Attach the support shelf cover to the right LanProbe slot using two 0.312” (7.93 mm) #M3 machine screws, or repeat steps 1 through 9 to install a second LanProbe in the support shelf.

9.Insert the support shelf into the rack (or cabinet) and attach it with four clip-

on sheet metal nuts (use if required) and four 0.55” (14 mm) 10-32 POZIDRIVâ screws. Figure 3-12 shows the completed LanProbe, power module, and support shelf.

10.Attach the power cord to the power module and to a power source. If this is the second LanProbe installed in the support shelf, you can use the optional Female-Male Power Cable (8120-1575) to attach power from one power module to the other.

Figure 3-12: LanProbe Installed in the Rack Support Shelf

36