IBM 4986B LanProbe manual Selecting the Cold Start Menu Item

LanProbe Operation

Restarting the Probe

Selecting the Cold Start Menu Item

Use the following procedure to cold start the probe using LanProbe’s Main Menu:

1.Connect a local terminal (or a PC emulation a terminal) to LanProbe. Refer to “LanProbe Operation” on page 69 for information on connecting a local terminal.

2.Press the CONFIG button once (on the back of the probe) to place LanProbe into the configuration mode. Use a narrow, pointed object (like a pen) to press the recessed CONFIG button. LanProbe then displays its Main Menu on the terminal. Figure 5-18 on page 73 shows LanProbe’s Main Menu.

3.Press 8 to execute a cold start and to exit LanProbe’s Main Menu. The cold start occurs immediately. The Activity and Fault LEDs are turned on during a cold start. When the cold start completes, the Activity LED flashes to indicate traffic (if present), the Fault LED turns off, and the ~Line On (or Power) LED is on.

75