IBM 4986B LanProbe The default is sMd1sATEOQOV1X4 S0=1, S2=43M, The default is d2s+++d2sATHOMd2

Local Terminal Configuration

Using a Local Terminal

Serial port speed	Press 5 and then enter a serial port speed (300 to 38,400
	baud) for LanProbe’s SNMP connection. The default is
	9600 baud. This speed is used only for Out-of-Band
	access to LanProbe using SNMP. It does not affect the
	serial connection for the local terminal, which is fixed at
	9600 baud.
	Make sure that the serial port speed is set to less than or
	equal to the maximum speed of the modem to be used.
Serial port mode	Press 6 and then select the serial port mode by pressing 1
	for direct connection (the default) or 2 for modem
	connection.
Serial port hardware	Press 7 and then select hardware flow control Off by
flow control	pressing 1 or hardware flow control On (the default) by
	pressing 2.
Modem Init String	Press 8 to enter the modem initialization string. Only the
	first 20 characters of the 256 character maximum will be
	displayed in the Modify/View Serial Port Settings menu.
	The default is ^s^M^d1^sATEOQOV1X4 S0=1
	S2=43^M.
Modem Hangup	Press 9 to enter the modem hang-up string. Only the
String	first 20 characters of the 256 character maximum will be
	displayed in the Modify/View Serial Port Settings menu.
	The default is ^d2^s+++^d2^sATHO^M^d2.
Modem Connect	Press 10 to enter the modem connect responses. Only
Responses	the first 20 characters of the 256 character maximum will
	be displayed in the Modify/View Serial Port Settings
	menu. The default is /CONNECT/300/CONNECT
	1200/1200/CONNECT 2400/2400/CONNECT
	4800/4800/CONNECT 9600/9600/CONNECT
	14400/14400/CONNECT 19200/19200/
	CONNECT 38400/38400/.

26