IBM 4986B LanProbe manual Autodiscovery

	Local Terminal Configuration
	Using a Local Terminal
Autodiscovery	Press 1 and enter the autodiscovery echo interval, in
Echo Interval	seconds, as desired for your probe (optional). This parameter
	sets the time interval for the probe to transmit an
	autodiscovery frame, which is used by HP OpenView
	NetMetrix to maintain its network map.
	The default value is 30 minutes (1800 seconds). A value of
	zero results in no transmission of autodiscovery frames.
Date	Press 2 and enter the day of the week and then the date in
	month/day/year format (mm/dd/yy, through 1999 or
	mm/dd/yyyy, starting 2000).
Time	Press 3 and enter the time of day in hours, minutes, seconds
	(hh:mm:ss) format.
Time Zone	Press 4 and enter your time zone in one to 15 characters
	(optional).
	The Time Zone characters are stored for your convenience
	and are used only to time-stamp probe information.
	Recommended practice is to use the format of Time Zone,
	hours from Greenwich mean time, and then Daylight Saving
	Time, such as PST8PDT for Pacific Standard Time (the
	default). The probe does not automatically update the Time
	field when your local time changes from standard time to
	daylight savings and back.

The values you enter for date and time take effect as soon as you enter them. All other parameters do not take effect until you select the Save Changes and Exit menu item.

3.Press S to save the configuration changes and return to LanProbe’s Main Menu. If you want to cancel your current changes and return to the LanProbe’s Main Menu, press 0.

19