IBM 4986B LanProbe manual 21 LanProbe Main Menu Networked PC

Download New Firmware

Downloading Firmware using a Networked PC and a Terminal

Main Menu - Revision

1. Modify/View configuration values ->

2. Modify/View security values ->

3. Modify/View interface values ->

4. Display interface summary

5. TFTP Download new firmware ->

6. XMODEM Download new firmware ->

7. Warm start and Exit

8. Cold start and Exit

	Figure 6-21: LanProbe Main Menu (Networked PC)
NOTE	Item 5 in Figure 6-21 is not displayed if the Allow TFTP firmware downloads
	menu item is not enabled. Refer to “Modify/View Security Values” on page 22 for
	more information on enabling this menu item.
	If item 5 (TFTP Download new firmware) is not displayed, the number used to
	access items 6, 7, and 8 will be different.
	2. Press 5 to display the Download menu as shown in Figure 6-22 on page 86.

TFTP Download Menu -- Firmware Rev.

1.	Filename	to download	ethsnmp.lp
2.	tftp server IP address		X.X.X.X
3.	Download	firmware
0.	Return to previous menu
LanProbe IP		address:	0.0.0.0
Subnet mask:			0.0.0.0
Default gateway IP address:			0.0.0.0

Figure 6-22: LanProbe TFTP Download Menu (Networked PC)

86