IBM 4986B LanProbe manual Using Novell NetWare

Bootp Server Configuration

Bootp Server Setup on a PC

Using Novell NetWare

If you have selected Microsoft LAN Manager 1.0 or later, go back to “Using Microsoft LAN Manager” on page 60.

If you have selected Novell NetWare v3.1 or later from the setup menu, use the following procedure to setup your Bootp installation.

1. Press return to continue from the following screen.

Bootp Installation for Novell networks:
=======================================
In order	to use this product using the	NetWare protocols,
you need	to be running client versions	of NetWare that
include:
- LSL.COM	v1.20 or later
Your NET.CFG file must specify a FRAME		type of
ETHERNET_II. For example, your NET.CFG		should include

something like:

LINK DRIVER HPWDSA8 FRAME ETHERNET_II

Bootp also requires that you do not have Novell TCP/IP software (LAN Workplace for DOS) installed.

(Press return to continue or ‘E’ to Exit.)

2.Specify the location of the NET.CFG file. The default is for the NET.CFG file to be located at C:\NOVELL\NET.CFG.

Setup could not find the NET.CFG file. Please specify a full path and filename (e.g. C:\NOVELL\NET.CFG):

62