IBM 4986B LanProbe manual Modify/View Serial Port Settings, 9 Display Interface Summary

Local Terminal Configuration

Using a Local Terminal

Display Interface Summary
Interface	Port Type	IP Address
------------	----------	-----------
1.1/Ethernet	Telemetry	15.6.72.216
1.2/Serial	Not Applicable	0.0.0.0

Figure 2-9: Display Interface Summary

Modify/View Serial Port Settings

You can view or modify LanProbe’s serial port settings by entering the Serial Port number (port 2) into the Modify/View Interface Values Menu’s Port parameter. The Serial Port configuration parameters are then shown along with their current settings. Use the following procedure to configure LanProbe’s serial port:

1.Enter the LanProbe’s Serial Port number (port 2) into the Modify/View Interface Values Menu’s Port parameter as shown in Figure 2-8 on page 21.

24