IBM 4986B LanProbe manual Probe Configuration Using a Local Terminal

Local Terminal Configuration

Probe Configuration Using a Local Terminal

Probe Configuration Using a Local Terminal

Some initial configuration information must be entered into LanProbe before it can communicate over the network interface or serial port. This initial configuration for network communication consists of the following parameters:

IP Address (for each Telemetry and Monitor/Transmit port)

Default Gateway IP Address (if required)

zSubnet Mask (if required) Autodiscovery Echo Interval

LanProbe uses the following configuration parameters to display time and date information in the user interface only. LanProbe uses a separate internal clock to time-stamp data collected from the network.

Date

zTime Time Zone

The initial configuration for communication over the serial port consists of the following parameters:

Serial Port IP Address

Serial Port Subnet Mask (if required)

Serial Port Speed

zSerial Port Mode

Modem Control String (if required)

15