Test Configuration of SpectraLink 8400 Series | Avaya 8400-SES

Figure 1: Test Configuration of SpectraLink 8400 Series

CRK; Reviewed:	Solution & Interoperability Test Lab Application Notes	4 of 21
SPOC 7/1/2011	©2011 Avaya Inc. All Rights Reserved.	Polycom8400-SES

Image 4

Avaya 8400-SES manual Test Configuration of SpectraLink 8400 Series

Contents

Abstract Introduction Interoperability Compliance TestingGeneral Test Approach and Test Results Test Results Reference ConfigurationSupport Test Configuration of SpectraLink 8400 Series Equipment and Software Validated Configure the Avaya Aura Communication ManagerEquipment Software/Firmware Optional Features Optional Features IP Port Capacities UsedCapacity Verification Used ## SET ENABLEG711U IP Codec Set Configure IP Network Region SET ENABLEG722## SET G726PAYLOADTYPE ## SET Dtmfpayloadtype Configure IP Node Name Configure SIP Signaling Signaling Group Configure SIP TrunkTrunk Group Configure SIP Endpoint ∙ Config Set Set to∙ Type Set to 9630SIP ∙ Application Set to OPS Extensions to Call Which Activate Features by Name Configure SIP Enablement Services Configure SIP Enablement Services Server PropertiesPage Configure Communication Manager Server Interface ∙ Pattern Click on the Add button Configure Users Page Configure SpectraLink 8400 Series Phoneconfig Verification StepsConclusion Additional References Avaya Inc. All Rights Reserved