Avaya 8400-SES manual Verification Steps, Conclusion, Additional References, Phoneconfig

</PHONE_CONFIG>

8. Verification Steps

The following steps may be used to verify the configuration:

∙Verify that SpectraLink 8400 Series successfully registers with SIP Enablement Services server by following the Users  Registered Users link on the SES Administration Web Interface.

∙Place calls to and from SpectraLink 8400 Series and verify that the calls are successfully established with two-way talk path.

∙While calls are established, Enter status trunk <t:r> command, where t is the SIP trunk group configured in Section 5.6, and r is trunk group member. This will verify whether the call is shuffled or not.

9.Conclusion

SpectraLink 8400 Series was compliance tested with Communication Manager (Version 5.2.1) and SIP Enablement Services (Version 5.2.1). SpectraLink 8400 Series (UCS 4.0.0.10555) functioned properly for feature and serviceability. During compliance testing, SpectraLink 8400 Series successfully registered with SIP Enablement Services, placed and received calls to and from SIP and non-SIP telephones, and executed other telephony features like three-way conference, transfers, hold, etc.

10. Additional References

The following Avaya product documentation can be found at http://support.avaya.com

[1]Administering Avaya Aura™ Communication Manager, Release 5.2, Issue 5.0, May 2009, Document Number 03-300509.

[2]Administering Avaya Aura™ SIP Enablement Services on the Avaya S8300 Server, Issue 2.0, May 2009, Document Number 03-602508.

The following document was provided by Polycom SpectraLink.

[3]Polycom® SpectraLink® 8400 Series Wireless Handset User Guide, February 2011, 1725- 36720-001 Rev A

CRK; Reviewed:	Solution & Interoperability Test Lab Application Notes	20 of 21
SPOC 7/1/2011	©2011 Avaya Inc. All Rights Reserved.	Polycom8400-SES