Avaya 8400-SES guide

In the Integrated Management SIP Server Management page, select the Server Configuration  System properties link from the left pane of the screen. Verify the SIP Domain matches the Far-end Domain field value configured for the signaling group on Communication Manager in Section 5.5. Click on the Update button, after the completion.

CRK; Reviewed:	Solution & Interoperability Test Lab Application Notes	14 of 21
SPOC 7/1/2011	©2011 Avaya Inc. All Rights Reserved.	Polycom8400-SES

Page 14

Image 14

Contents

Abstract General Test Approach and Test Results Interoperability Compliance TestingIntroduction Support Reference ConfigurationTest Results Test Configuration of SpectraLink 8400 Series Equipment Software/Firmware Configure the Avaya Aura Communication ManagerEquipment and Software Validated Capacity Verification Optional FeaturesOptional Features IP Port Capacities Used Used ## SET ENABLEG711U IP Codec Set ## SET G726PAYLOADTYPE Configure IP Network RegionSET ENABLEG722 ## SET Dtmfpayloadtype Configure IP Node Name Configure SIP Signaling Trunk Group Configure SIP TrunkSignaling Group ∙ Type Set to 9630SIP Configure SIP Endpoint∙ Config Set Set to ∙ Application Set to OPS Extensions to Call Which Activate Features by Name Configure SIP Enablement Services Configure SIP Enablement Services Server PropertiesPage Configure Communication Manager Server Interface ∙ Pattern Click on the Add button Configure Users Page Configure SpectraLink 8400 Series Conclusion PhoneconfigVerification Steps Additional References Avaya Inc. All Rights Reserved

Avaya 8400-SES manual

Models: 8400-SES